(THIS TUTORIAL IS TESTED AND WORKS 100%)
YOU SHOULD LEARN THIS ALL IF YOU ARE A BEGINNER TO HACKING, SO LET’S START TO GET A COMPLETE ACCESS OF A REMOTE PC.
- How Can You Hack A Computer ?
- What is DNS ? And Its DNS Use In RAT ( Remote Administration Tool )
- What Is UNPN ?
- How to Setup UNPN for RATS ?
- How To Setup DarkComet ?
- How to Port Forward TCP/UDP ?
- Setup Rat Without Port forwarding
- List of the Top Ten Rats
Before Starting Please note that this tutorial is only for educational purpose i am not responsible for any of your act done after reading this tutorial
Many Peoples Now a days were requesting me to write one article on how could they setup a RAT ( RemoteAdministration Tool ) which is used to remotely control the computer,s or in simple words to hack thecomputers.
To setup Rat You Must have the basic knowledge of some important things which we will discuss below and many peoples on the internet are searching for how to setup RAT but they are confused of different methods which create,s a nexus and they fail to setup their RAT server but after reading this article i guarantee you that you will be able to setup you rat server.
1. How Can You Hack A Computer ?
Well Everyone ask this Question and to hack a computer there are many ways of hacking computer by exploiting it and one of the most famous way to hack the computer used by many hackers is to execute the RAT Server in the victim,s computer , once you have executed the server you will be able to control his computer from A to Z mean everything.
2. What is DNS ? And Use of DNS in RAT ?
For this tutorial i would be using the famous and the most stable RAT Tool ” Dark Comet V 5.3 “.
- Goto www.noip.com click on Sign Up
- Fill Up the Form and chose free Dns
Step 1 ( Port Forwarding )
After this you will find the Default GateWay IP address so note down or copy it
- user : admin
- pass : admin
- user : admin
- pass : admin123 ( If you fail to login try Googling your router,s default user pass ) or contact the admin
- Write the IP Address in Servers IP BOX
- Write 1122 port number in begin and end box and select tcp/udp or if you have only one choice then select TCP and after adding the TCP add UDP in the same way.
- Click Save
- Click on Socket TAB
Right Click on Socke Handle Boxes and click on Add Port To Listen And Write down ” 1122 ” port in the box.After Writing the Port Click on Listen and it will start listening
- Now Goto www.canyouseeme.org
- If you get the Success in Green it mean you have done it and port is forwarded and now there are 100% chances that your RAT will work. and if you get Error in RED sign saying ” Error: I could not see your service on…..” Then you have done somthing wrong in forwarding your port on Router. So try to search on Google That ” How TO Port Forward on ‘your router name’ ”
- Note that If you are still getting that error please read furthure below we can do one more thing as we can setup rat using UNPN function so please have some patience and move to the UNPN.
UNPN ( Setup Without Port forwarding )
Note :- If you have sucessfully forwarded your port please move to step 2 and leave it
Many Routers are enabled with UNPN function but try to check that UNPN is enabled on your router by logging in and checking in the forwarding or networking section.
- You Must Have Utorrent So download it – Click here
- Open Dark-Comet and click on socket
- Now Right Click below the Socket Handle and A box will open so write down 1122 port in that box
- Note: DO Not Close DarkComet leave it as it is
- Now open Utorrent and click on Option > Preferences
- Now In This write down the port 1122 in a box near random ports and click on OK
- fter Clicking OK you have done it now Port is forwarded using UNPN so check it by entering your port in www.canyouseeme.org
- To create the server please click on DarkComet-Rat to open Options
- After Click on Server Module And then click on Minimalist.
- Now A box will appear and you have to type your details in it.
- In Stub Id write your server name .
- In IP/DNS write you DNS Address which you created while sign up on www.noip.com.
- In Port write down the same port you forwarded ” 1122 ” .
- Click on Normal and Chose the path where to save the server and click save.
- Download the NO-IP client by clicking here ( or goto noip.com and click on download )
- Now After Downloading Install it and Open it
- If you cant find it please search in start menu ” DUC ” you will get it
- Click on Edit Hosts
- Chose Your Hosts by click on check box and click on save
If you want to port forward within few clicks
STEP 2 ( Creation of Server )
Step 3 ( Setting UP No-Ip DNS Client )
Now Click on Refresh Now and you will see 3 green signals and its a good symbol keep in mind that before starting DarkComet Please Refresh it once because it will update your ip address in your slaves so you can access them and also if you will not refresh your no-ip in 60 days they will delete your account so refresh your noip daily.Now send the server which you created to any of your victim which you want to hack and after he executes that server on his/her Computer then he will appear on your DarkComet Module and you can control his pc for a long time.Note that do not try to test the server on your own computer because it will not work on your own computer so try to test it on any,ones computer and the victim must not have Anti Virus because Dark comet is detected by almost every anti Virus so you will have to encrypt your server to make it Undetectable.I hope you liked my tutorial and you have learned many things from this tutorial and if you face any problem just comment your problem below in the comment box i will replay as soon as possible.