How to Hack Website Using Sql Map in Kali Linux – Sql Injection


In this tutorial i’m going to explain how to hack a website using sql map,  sqlmap is an open source penetration testing tool that automates the process of detecting and exploiting SQL injection flaws and taking over of database servers. This tool is available in Kali Linux (Hacker’s Os).


Let’s start with Kali Linux,

Kali Linux

First off, you need to have Kali linux (or backtrack) up and running on your machine. Any other Linux distro might work, but you’ll need to install Sqlmap on your own. Now if you don’t have Kali Linux installed, you might want to go to this page: An Introduction to Hacker’s OS Kali Linux and Installation Tutorial

Suggest you to read: Kali Linux Tutorial: Find Vulnerabilities for Any Website Using Nikto

Sqlmap

Basically its just a tool to make Sql Injection easier. Their official website  introduces the tool as -“sqlmap is an open source penetration testing tool that automates the process of detecting and exploiting SQL injection flaws and taking over of database servers. It comes with a powerful detection engine, many niche features for the ultimate penetration tester and a broad range of switches lasting from database fingerprinting, over data fetching from the database, to accessing the underlying file system and executing commands on the operating system via out-of-band connections.”
A lot of features can be found on the SqlMap website, the most important being – “Full support for MySQL, Oracle, PostgreSQL, Microsoft SQL Server, Microsoft Access, IBM DB2, SQLite, Firebird, Sybase and SAP MaxDB database management systems.” That’s basically all the database management systems. Most of the time you’ll never come across anything other than MySql. 

Hacking Websites Using Sqlmap in Kali linux

Sql Version

Boot into your Kali linux machine. Start a terminal, and type –

sqlmap -h

It lists the basic commands that are supported by SqlMap. To start with, we’ll execute a simple command
sqlmap -u <URL to inject>. In our case, it will be-

sqlmap -u http://testphp.vulnweb.com/listproducts.php?cat=1

Sometimes, using the –time-sec helps to speed up the process, especially when the server responses are slow.

sqlmap -u http://testphp.vulnweb.com/listproducts.php?cat=1 –time-sec 15

Either ways, when sqlmap is done, it will tell you the Mysql version and some other useful information about the database.
answered in yes/no. Typing y means yes and n means no. Here are a few typical questions you might come across-
  • Some message saying that the database is probably Mysql, so should sqlmap skip all Note: Depending on a lot of factors, sqlmap my sometimes ask you questions which have to be other tests and conduct mysql tests only. Your answer should be yes (y).
  • Some message asking you whether or not to use the payloads for specific versions of Mysql. The answer depends on the situation. If you are unsure, then its usually better to say yes.

Enumeration

Database

In this step, we will obtain database name, column names and other useful data from the database.
So first we will get the names of available databases. For this we will add –dbs to our previous command. The final result will look like –

sqlmap -u http://testphp.vulnweb.com/listproducts.php?cat=1 –dbs

So the two databases are acuart and information schema.

Table

Now we are obviously interested in acuart database. Information schema can be thought of as a default table which is present on all your targets, and contains information about structure of databases, tables, etc., but not the kind of information we are looking for. It can, however, be useful on a number of occasions. So, now we will specify the database of interest using -D and tell sqlmap to enlist the tables using –tables command. The final sqlmap command will be-

sqlmap -u http://testphp.vulnweb.com/listproducts.php?cat=1 -D acuart –tables

The result should be something like this – 

Now we have a list of tables. Following the same pattern, we will now get a list of columns.

Columns

Now we will specify the database using -D, the table using -T, and then request the columns using –columns. I hope you guys are starting to get the pattern by now. The most appealing table here is users. It might contain the username and passwords of registered users on the website (hackers always look for sensitive data).
The final command must be something like-

sqlmap -u http://testphp.vulnweb.com/listproducts.php?cat=1 -D acuart -T users –columns

The result would resemble this-

Data

Now, if you were following along attentively, now we will be getting data from one of the columns. While that hypothesis is not completely wrong, its time we go one step ahead. Now we will be getting data from multiple columns. As usual, we will specify the database with -D, table with -T, and column with -C. We will get all data from specified columns using –dump. We will enter multiple columns and separate them with commas. The final command will look like this.

sqlmap -u http://testphp.vulnweb.com/listproducts.php?cat=1 -D acuart -T users -C email,name,pass –dump

Here’s the result
You are done,
John Smith, of course. And the password is test. Email is email@email.com?? Okay, nothing great, but in the real world web pentesting, you can come across more sensitive data. Under such circumstances, the right thing to do is mail the admin of the website and tell him to fix the vulnerability ASAP. Don’t get tempted to join the dark side. You don’t look pretty behind the bars. That’s it for this tutorial. Try to look at other columns and tables and see what you can dig up, Thank you.

Sharing is caring!

One thought on “How to Hack Website Using Sql Map in Kali Linux – Sql Injection

  1. WE PROVIDE PROOF BEFORE PAYMENT!!!
    We keep it professional, we are underground hackers. It's high time people stopped getting ripped of. We work on all forms of hacking from spying on cheating spouses (emails and mobile phone)/ Change grades/ Clear criminal records/ Public and private databases/ Private investigations/ All forms of social media hacks (Instagram/twitter/facebook etc).
    Email: tracktechnet@gmail.com | Phone no: +12403172142 | Website: http://www.tracktechlimited.com

Leave a Reply

Your email address will not be published. Required fields are marked *

Related Posts

Begin typing your search above and press enter to search. Press ESC to cancel.

Back To Top

So glad to see you sticking around!

Want to be the first one to receive the new stuff?

Enter your email address below and we'll send you the goodies straight to your inbox.

Thank You For Subscribing

This means the world to us!

Spamming is not included! Pinky promise.